HASCO Waveguide Components

Welcome to HASCO's Waveguide Components.  Our in-stock line continues to become more robust, making it easier to fulfill your requirements. HASCO customers utilize our waveguide components to up-convert, mix, filter, amplify or condition signals in test environments or in communications platforms. Whether a mmWave system is a 5G radio at 39 GHz, or collision avoidance at 77 GHz, or an unlicensed application at 60 GHz, HASCO can supply standard and custom waveguide components. 

If we don't have it readily in stock, we will work to get you what you need. 

---

	Adapters (Waveguide to Coax) HASCO waveguide to coaxial transitions are designed to provide enhanced RF performance, resulting in characteristics like low insertion loss and low VSWR.		Gain Horn Antennas HASCO gain horns have a pyramidal shape with a rectangular aperture. The standard gain horn antenna supports linear polarized waveforms. The standard gain horn antenna is used for antenna range calibration and general-purpose system set ups.
	Amplifiers HASCO's line of amplifiers are high performance LNA and power amplifier designs with extremely low noise and broadband performance in Coaxial Amplifier, Waveguide Amplifier and MMIC Amplifier options.		Isolators HASCO Isolators provide a high degree of isolation between signal sources and mismatched loads by attenuating the reflected signals. The insertion loss in the forward direction is minimized to allow for the full available power from the signal source-isolator combination.
	Attenuators HASCO offers a series of rectangular waveguide attenuators covering the waveguide sizes WR-10, WR-12 and WR-15 and fixed attenuation values of 3 dB, 6 dB, 10 dB, 20 dB and 30 dB.		Mixers HASCO offers a selection of microwave and millimeter-wave Mixers and Frequency Multipliers in packaged and MMIC designs.
	Circulators HASCO provides custom high performance passive microwave component designs up to 67GHz for Commercial, Defense, and Space applications.		Multipliers HASCO offers a selection of microwave and millimeter-wave Mixers and Frequency Multipliers in packaged and MMIC designs.
	Detectors Waveguide detectors offered by HASCO are square root small signal detectors.		Sections HASCO waveguide sections provide different configurations to route waveguide signals between devices using Straight Waveguides, Twist Waveguides, E-Bend Waveguides, H-Bend Waveguides in common 1 inch, 2 inch and 2.5 inch lengths.
	Filters HASCO offers Band-pass, Band-stop (notch), Low-pass, and High-pass waveguide filters.		Terminations HASCO offers a series of rectangular waveguide terminations covering the waveguide sizes WR-10, WR-12, WR-15, WR-19, WR-22, WR-28 and WR-51.