1492-04A-9, 2.4mm Female End Launch Connector -Narrow Block (.350) Thread-In

$122.25
Part #:
1492-04A-9
Brand:
Southwest Microwave
Weight:
0.50 Ounces
Shipping:
Calculated at checkout
Current Stock:
23

For quantities greater than current stock levels, please contact customer service at 1-888-498-3242

Pricing by Quantity:

QUANTITY

1 to 9

Buy 10 - 24

Buy 25 - 49

Buy 50 or above

PRICE

$122.25

$99.32

$88.89

$80.04

ADD TO WISHLIST

Description

Southwest Microwave Part Number: 1492-04A-9

The 1492-04A-9 is an End Launch Connector manufactured by Southwest Microwave. The 1492-04A-9 is a 2.40mm Female coax connector with transition to PCB that operates up to 50 GHz. End Launch Connectors help reduce losses caused by the transition from PCB to Coax Connector and maintain a Low VSWR and RF Leakage. This End Launch is a Low Profile design available for Microstrip or Coplanar printed circuit boards. All End Launch are field replaceable and require no solder for reusability. Southwest Microwave offers launch design support and various pin diameter configurations. Southwest Microwave Cage Code: 66049

Click Here for the 1492-04A-9 Datasheet« Click Here for the 1492-04A-9 Detasheet


 
Pin Diameter: .005
Dielectric Diameter: .0290
Substrate Thickness: Up to .100
 
 
Electrical:
  • Mode Free Through 50 GHz

Material & Finish: 2.40mm Connector:
  • HOUSING: STEEL, CRES ALLOY UNS 30300 PER ASTM A582 PASSIVATED PER ASTM A967-99
  • CONTACT: BeCu UNS C17300 PER ASTM B196 GOLD PLATE PER MIL-DTL-45204
  • CAPTURE BEAD: ULTEM 1000 PER ASTM D5205
  • BEAD: KEL-F (PCTFE) PER ASTM D1430

Transition Block: 

  • TRANSITION BLOCK: C360 BRASS ALLOY UNS C36000 PER ASTM B16. NICKEL PLATE PER AMS 2404B
  • GROUNDING PLATE: C360 BRASS ALLOY UNS C36000 PER ASTM B16. NICKEL PLATE PER AMS 2404B
  • THREADED CLAMPING PLATE: C360 BRASS ALLOY UNS C36000 PER ASTM B16. NICKEL PLATE PER AMS 2404B
  • LAUNCH PIN: BeCu UNS C17300 PER ASTM B196 GOLD PLATE PER MIL-DTL-45204
  • TRANSITION BLOCK DIELECTRIC: VIRGIN PTFE FLUOROCARBON PER ASTM D1710, TYPE 1 GRADE 1, CLASS B

 
TEST DATA:
 

End Launch Connectors on a Coplanar Board

Below are test results to 50 GHz for two 1492-04A-5 end launch connectors on a .008" Rogers RO4003 coplanar board. The plot shows both VSWR and insertion loss for the test board and the two connectors. Similar boards are used for the other launch geometries.

 

Connector No.1492-04A-5

coplanar1-image.png

 


 
End Launch Connectors on a Microstrip Board

Below are test results to 67 GHz for two 1892-04A-5 end launch connectors on a .008" Rogers RO4003 microstrip board with top ground launch. The plot shows both VSWR and insertion loss for the test board and the two connectors. This is not a standard test board.

 

Connector No.1892-04A-5

 

microstrip1-image.png

*** FOR QUANTITIES GREATER THAN CURRENT STOCK LEVELS CONTACT CUSTOMER SERVICE 1-888-498-3242
Type:
Coax Connectors
Style:
End Launch Connectors
Application:
2.4mm Connectors
Connector:
2.4mm Female
Mount Type:
PCB
Termination Type:
Solder
Feature:
None
Orientation:
Straight
Max Frequency (GHz):
50
PRODUCT DETAILS
Southwest Microwave Part Number: 1492-04A-9

The 1492-04A-9 is an End Launch Connector manufactured by Southwest Microwave. The 1492-04A-9 is a 2.40mm Female coax connector with transition to PCB that operates up to 50 GHz. End Launch Connectors help reduce losses caused by the transition from PCB to Coax Connector and maintain a Low VSWR and RF Leakage. This End Launch is a Low Profile design available for Microstrip or Coplanar printed circuit boards. All End Launch are field replaceable and require no solder for reusability. Southwest Microwave offers launch design support and various pin diameter configurations. Southwest Microwave Cage Code: 66049

Click Here for the 1492-04A-9 Datasheet« Click Here for the 1492-04A-9 Detasheet


 
Pin Diameter: .005
Dielectric Diameter: .0290
Substrate Thickness: Up to .100
 
 
Electrical:
  • Mode Free Through 50 GHz

Material & Finish: 2.40mm Connector:
  • HOUSING: STEEL, CRES ALLOY UNS 30300 PER ASTM A582 PASSIVATED PER ASTM A967-99
  • CONTACT: BeCu UNS C17300 PER ASTM B196 GOLD PLATE PER MIL-DTL-45204
  • CAPTURE BEAD: ULTEM 1000 PER ASTM D5205
  • BEAD: KEL-F (PCTFE) PER ASTM D1430

Transition Block: 

  • TRANSITION BLOCK: C360 BRASS ALLOY UNS C36000 PER ASTM B16. NICKEL PLATE PER AMS 2404B
  • GROUNDING PLATE: C360 BRASS ALLOY UNS C36000 PER ASTM B16. NICKEL PLATE PER AMS 2404B
  • THREADED CLAMPING PLATE: C360 BRASS ALLOY UNS C36000 PER ASTM B16. NICKEL PLATE PER AMS 2404B
  • LAUNCH PIN: BeCu UNS C17300 PER ASTM B196 GOLD PLATE PER MIL-DTL-45204
  • TRANSITION BLOCK DIELECTRIC: VIRGIN PTFE FLUOROCARBON PER ASTM D1710, TYPE 1 GRADE 1, CLASS B

 
TEST DATA:
 

End Launch Connectors on a Coplanar Board

Below are test results to 50 GHz for two 1492-04A-5 end launch connectors on a .008" Rogers RO4003 coplanar board. The plot shows both VSWR and insertion loss for the test board and the two connectors. Similar boards are used for the other launch geometries.

 

Connector No.1492-04A-5

coplanar1-image.png

 


 
End Launch Connectors on a Microstrip Board

Below are test results to 67 GHz for two 1892-04A-5 end launch connectors on a .008" Rogers RO4003 microstrip board with top ground launch. The plot shows both VSWR and insertion loss for the test board and the two connectors. This is not a standard test board.

 

Connector No.1892-04A-5

 

microstrip1-image.png

WARRANTY INFORMATION
*** FOR QUANTITIES GREATER THAN CURRENT STOCK LEVELS CONTACT CUSTOMER SERVICE 1-888-498-3242
Part No: 1492-04A-9
1492-04A-9, 2.4mm Female End Launch Connector -Narrow Block (.350) Thread-In

Southwest Microwave Part Number: 1492-04A-9

The 1492-04A-9 is an End Launch Connector manufactured by Southwest Microwave. The 1492-04A-9 is a 2.40mm Female coax connector with transition to PCB that operates up to 50 GHz. End Launch Connectors help reduce losses caused by the transition from PCB to Coax Connector and maintain a Low VSWR and RF Leakage. This End Launch is a Low Profile design available for Microstrip or Coplanar printed circuit boards. All End Launch are field replaceable and require no solder for reusability. Southwest Microwave offers launch design support and various pin diameter configurations. Southwest Microwave Cage Code: 66049

Click Here for the 1492-04A-9 Datasheet« Click Here for the 1492-04A-9 Detasheet


 
Pin Diameter: .005
Dielectric Diameter: .0290
Substrate Thickness: Up to .100
 
 
Electrical:
  • Mode Free Through 50 GHz

Material & Finish: 2.40mm Connector:
  • HOUSING: STEEL, CRES ALLOY UNS 30300 PER ASTM A582 PASSIVATED PER ASTM A967-99
  • CONTACT: BeCu UNS C17300 PER ASTM B196 GOLD PLATE PER MIL-DTL-45204
  • CAPTURE BEAD: ULTEM 1000 PER ASTM D5205
  • BEAD: KEL-F (PCTFE) PER ASTM D1430

Transition Block: 

  • TRANSITION BLOCK: C360 BRASS ALLOY UNS C36000 PER ASTM B16. NICKEL PLATE PER AMS 2404B
  • GROUNDING PLATE: C360 BRASS ALLOY UNS C36000 PER ASTM B16. NICKEL PLATE PER AMS 2404B
  • THREADED CLAMPING PLATE: C360 BRASS ALLOY UNS C36000 PER ASTM B16. NICKEL PLATE PER AMS 2404B
  • LAUNCH PIN: BeCu UNS C17300 PER ASTM B196 GOLD PLATE PER MIL-DTL-45204
  • TRANSITION BLOCK DIELECTRIC: VIRGIN PTFE FLUOROCARBON PER ASTM D1710, TYPE 1 GRADE 1, CLASS B

 
TEST DATA:
 

End Launch Connectors on a Coplanar Board

Below are test results to 50 GHz for two 1492-04A-5 end launch connectors on a .008" Rogers RO4003 coplanar board. The plot shows both VSWR and insertion loss for the test board and the two connectors. Similar boards are used for the other launch geometries.

 

Connector No.1492-04A-5

coplanar1-image.png

 


 
End Launch Connectors on a Microstrip Board

Below are test results to 67 GHz for two 1892-04A-5 end launch connectors on a .008" Rogers RO4003 microstrip board with top ground launch. The plot shows both VSWR and insertion loss for the test board and the two connectors. This is not a standard test board.

 

Connector No.1892-04A-5

 

microstrip1-image.png

Part No: 1492-04A-9
LTR
DESCRIPTION
DATE
APPR
THIS DRAWING IS A CONTROLLED DOCUMENT
DRAWN BY:
CHECKED BY:
APPROVED BY:
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF HASCO COMPONENTS AND SHALL NOT BE REPRODUCED, COPIED NOR USED - IN WHOLE OR IN PART - AS THE BASIS FOR THE MANUFACTURE OR SALE OF OTHER ITEMS WITHOUT THE EXPRESS, RITTEN PERMISSION OF HASCO COMPONENTS.

MATERIALS:

SEE DATA SHEET

CAGE CODE:

1492-04A-9

MATERIALS:

SEE DATA SHEET

SCALE:

NS

SIZE:

REV:

Request a Quote