sales@hasco-inc.com 
888-498-3242 
HLL110R & HLL145R Ruggedized mmWave Cable Assemblies | 110–145 GHz
HLL110R & HLL145R Cable Assemblies Through 145 GHz
Choose 1.0 mm assemblies through 110 GHz or extend the measurement path to 145 GHz with 0.8 mm interfaces—both engineered for low loss, mechanical protection and stable performance in demanding mmWave test setups.
Use the lowest-frequency interface that fully covers the test.
The connector interface, length and routing requirements determine the right family. HLL110R is the practical choice through 110 GHz; HLL145R is intended for measurements that require 0.8 mm coverage through 145 GHz.
Match the cable to the complete measurement path.
Do not choose on frequency alone. Confirm the instrument and DUT interfaces, assembly length, allowable insertion loss, bend radius and connector-care process.
| Specification | HLL110R | HLL145R | Selection impact |
|---|---|---|---|
| Frequency range | DC-110 GHz | DC-145 GHz | Cover the highest required test frequency. |
| Connector interface | 1.0 mm | 0.8 mm | Match the instrument and DUT without avoidable adapters. |
| Published VSWR | 1.35:1 at 110 GHz | 1.50:1 max | Use the length-specific datasheet for final limits. |
| Minimum bend radius | 30 mm | 50 mm repeated | Check the actual routed path before ordering. |
| Temperature range | -55°C to +85°C | -55°C to +85°C | Applies to the published cable family limits. |
| Representative lengths | 6-48 in. and 1 m | 4-24 in. | Shorter assemblies reduce insertion loss. |
Length matters: insertion loss rises with assembly length and frequency. Select the shortest practical cable that preserves safe routing and connector access.
Define the interface, gender and length before the quote.
Set the upper frequency
Use HLL110R through 110 GHz or HLL145R when the setup extends beyond 110 GHz to 145 GHz.
Match connector gender
Choose male-to-male, male-to-female or female-to-female configurations around the actual test ports.
Choose the shortest safe length
Allow enough reach and strain relief without adding avoidable insertion loss or forcing a bend below the published radius.
Protect precision interfaces
Use proper inspection, cleaning, alignment and torque practices. Never use the cable body to rotate a precision connector.
High-frequency connections for the lab and production floor.
VNA measurements
Precision test-port connections through 110 or 145 GHz.
Device characterization
Amplifier, mixer, multiplier and interconnect evaluation.
Production test
Ruggedized assemblies for repeated connection and routing demands.
mmWave development
Radar, communications, imaging and research systems.
Specify the cable around the complete test setup.
Match frequency, interface, gender and length.
Review loss, VSWR and routing limits before ordering.
HASCO is AS9120:B and ISO 9001:2015 certified.
Confirm configuration, quantity and required delivery.
Request an HLL110R or HLL145R Cable Quote
Include the maximum test frequency, connector interface and gender at each end, required length, minimum routing radius, quantity and requested delivery date.
Start Your Quote RequestCall 888.498.3242 or email sales@hasco-inc.com
