Description
Preset Torque Wrench for SMA, 2.92mm, 3.5mm, 2.4mm, 1.85mm with 5/16 Hex Bit Preset to 8 in-lbs.
Preset torque wrenches are used to properly mate RF Hex Connectors with proper force to ensure a good mate and prevent damage to the center conductors or cause thread stripping. Preset Torque wrenches are available from HASCO Components for various types of coaxial connectors. HASCO offers both the breakover and click type wrenches. Every connector has a different torque setting depending on materials and hex size. Please refer to the table below for additional information.
Part Number: HTW-516-08 - Torque Value: 0.92 ± 0.05 NM [8.0 ± 0.4 in lbs]
Part No. | Description |
HTW-516-05 | SMA, 3.5mm, 2.92mm, 2.4mm and 1.85mm (5/16 HEX) - Preset Torque: 5.0 ±0.2 In.lbs (0.56 ±0.02 Nm) |
HTW-516-08 | SMA, 3.5mm, 2.92mm, 2.4mm and 1.85mm (5/16 HEX) - Preset Torque: 8.0 ±0.4 In.lbs (0.92 ±0.05 Nm) |
HTW-34-08 | Type N (3/4 HEX) - Preset Torque: 8.0 ±0.4 in.lbs (0.92 ±0.05 Nm) |
HTW-34-14 | Type N and 7mm (3/4 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm) |
HTW-34-23 | Type N and 7mm (3/4 HEX) - Preset Torque: 23.0 ±0.92 in.lbs (2.598 ±0.10 Nm) |
HTW-2532-14 | Type N (25/32 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm) |
HTW-1316-14 | Type N and SC (13/16 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm) |
HTW-916-12 | TNC (9/16 HEX) - Preset Torque: 12.0 ±0.6 in.lbs (1.36 ±0.09 Nm) |
HTW-58-12 | TNC (5/8 HEX) - Preset Torque: 12.0 ±0.6 in.lbs (1.36 ±0.09 Nm) |
HTW-532-02 | SSMC (5/32 HEX) - Preset Torque: 2.0 ±0.1 In.lbs (0.23 ±0.01 Nm) |
HTW-14-05 | SSMA (1/4 HEX) Preset Torque: 5.0 ±0.2 In.lbs (0.57 ±0.02 Nm) |
HTW-14-08 | SSMA (1/4 HEX) Preset Torque: 8.0 ±0.4 In.lbs (0.92 ±0.05 Nm) |
HTW-1564-04 | |
HTW-1.0mm-KIT |
|
*Disclaimer Notification:
The certificate of calibration comes from a reliable and proprietary source. It is up to the purchaser of this item to determine if they can use this certificate. Please contact your HASCO Representative with any questions. HASCO does not calibrate this item.
- Type:
- Torque Wrench
- Style:
- SMA Torque Wrench
- Application:
- SMA, 2.92mm, 2.4mm, 1.85mm
PRODUCT DETAILS 

Preset Torque Wrench for SMA, 2.92mm, 3.5mm, 2.4mm, 1.85mm with 5/16 Hex Bit Preset to 8 in-lbs.
Preset torque wrenches are used to properly mate RF Hex Connectors with proper force to ensure a good mate and prevent damage to the center conductors or cause thread stripping. Preset Torque wrenches are available from HASCO Components for various types of coaxial connectors. HASCO offers both the breakover and click type wrenches. Every connector has a different torque setting depending on materials and hex size. Please refer to the table below for additional information.
Part Number: HTW-516-08 - Torque Value: 0.92 ± 0.05 NM [8.0 ± 0.4 in lbs]
Part No. | Description |
HTW-516-05 | SMA, 3.5mm, 2.92mm, 2.4mm and 1.85mm (5/16 HEX) - Preset Torque: 5.0 ±0.2 In.lbs (0.56 ±0.02 Nm) |
HTW-516-08 | SMA, 3.5mm, 2.92mm, 2.4mm and 1.85mm (5/16 HEX) - Preset Torque: 8.0 ±0.4 In.lbs (0.92 ±0.05 Nm) |
HTW-34-08 | Type N (3/4 HEX) - Preset Torque: 8.0 ±0.4 in.lbs (0.92 ±0.05 Nm) |
HTW-34-14 | Type N and 7mm (3/4 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm) |
HTW-34-23 | Type N and 7mm (3/4 HEX) - Preset Torque: 23.0 ±0.92 in.lbs (2.598 ±0.10 Nm) |
HTW-2532-14 | Type N (25/32 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm) |
HTW-1316-14 | Type N and SC (13/16 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm) |
HTW-916-12 | TNC (9/16 HEX) - Preset Torque: 12.0 ±0.6 in.lbs (1.36 ±0.09 Nm) |
HTW-58-12 | TNC (5/8 HEX) - Preset Torque: 12.0 ±0.6 in.lbs (1.36 ±0.09 Nm) |
HTW-532-02 | SSMC (5/32 HEX) - Preset Torque: 2.0 ±0.1 In.lbs (0.23 ±0.01 Nm) |
HTW-14-05 | SSMA (1/4 HEX) Preset Torque: 5.0 ±0.2 In.lbs (0.57 ±0.02 Nm) |
HTW-14-08 | SSMA (1/4 HEX) Preset Torque: 8.0 ±0.4 In.lbs (0.92 ±0.05 Nm) |
HTW-1564-04 | |
HTW-1.0mm-KIT |
|
*Disclaimer Notification:
The certificate of calibration comes from a reliable and proprietary source. It is up to the purchaser of this item to determine if they can use this certificate. Please contact your HASCO Representative with any questions. HASCO does not calibrate this item.