sales@hasco-inc.com 
888-498-3242 
Description
The DA100-5M00-D is a Distribution Amplifier with SMA Panel Mount Rear Connectors, Short SMA Connectors on Front, 5 Channel, designed for 5 MHz operation by Esterline Research and Design. The DA100 Distribution Amplifier primary function is to distribute an existing signal to multiple points while preserving its integrity. It includes a limiter circuit that not only provides a fixed output level but also offers high input gain. This design allows the amplifier to maintain the specified output power across a wide range of input power levels. The input limiter is followed by three amplifier/low-pass filter stages, which insure low-distortion sine wave outputs.
« Datasheet « Operation ManualSpecifications
Item |
Specification |
|---|---|
|
Frequency Range |
1 to 100 MHz |
|
Impedance |
45 to 55 Ohms |
|
Amplitude (Input) |
-10 to 16 dBm |
|
Amplitude |
8 to 12 dBm (5 MHz, 10 MHz) |
|
Amplitude |
1 to 1.30 Vrms |
|
THD |
1% Max |
|
Channel-to-Channel Isolation |
70 dB Min |
|
Voltage |
6 to 12 VDC |
|
Current |
250 mA |
- Type:
- Amplifier
- Style:
- Distribution
- Impedance (Ohms):
- 50
- Isolation (dB):
- 70
- Min Frequency (MHz):
- 1
- Max Frequency (MHz):
- 100
- Input Connector:
- SMA
- Output Connector:
- SMA
PRODUCT DETAILS 
The DA100-5M00-D is a Distribution Amplifier with SMA Panel Mount Rear Connectors, Short SMA Connectors on Front, 5 Channel, designed for 5 MHz operation by Esterline Research and Design. The DA100 Distribution Amplifier primary function is to distribute an existing signal to multiple points while preserving its integrity. It includes a limiter circuit that not only provides a fixed output level but also offers high input gain. This design allows the amplifier to maintain the specified output power across a wide range of input power levels. The input limiter is followed by three amplifier/low-pass filter stages, which insure low-distortion sine wave outputs.
« Datasheet « Operation ManualSpecifications
Item |
Specification |
|---|---|
|
Frequency Range |
1 to 100 MHz |
|
Impedance |
45 to 55 Ohms |
|
Amplitude (Input) |
-10 to 16 dBm |
|
Amplitude |
8 to 12 dBm (5 MHz, 10 MHz) |
|
Amplitude |
1 to 1.30 Vrms |
|
THD |
1% Max |
|
Channel-to-Channel Isolation |
70 dB Min |
|
Voltage |
6 to 12 VDC |
|
Current |
250 mA |
