sales@hasco-inc.com 
888-498-3242 
Description
HASCO Part Number: HT40F-1
HT18F-2G-1 is a 2.92mm Female RF Load / RF Termination manufactured by HASCO Components. HT18F-2G-1 is rated for operation from DC to 18 GHz and rated for 2 Watt. RF Loads, also known as Terminations are used to prevent signals from flowing back into a transmission line causing unwanted distortion and power loss. Terminations are available for coaxial transmission lines and waveguide. RF load/terminations are indispensable components in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce the signal integrity. By using a termination on an unused port with a matched load (dummy load), the incident energy will be absorbed with minimal reflection. These termination components are commonly used to terminate devices such as couplers, circulators, and switches. They are also widely used in measurement systems to ensure accurate results. HASCO offers a huge selection of RF, microwave and millimeter wave terminations up to 65 GHz with excellent performance over the entire operating range and power handling capabilities up to 800 Watt (CW). HASCO Cage Code: 0T8L4
« Click Here for the HT18F-2G-1 Datasheet
Electrical
Parameter |
Minimum |
Typical |
Maximum |
|
Frequency Range |
DC |
|
18 GHz |
|
VSWR |
DC-6 GHz 1.10:1 |
|
6-18GHz 1.20:1 |
|
Power |
2 Watt | .25 KW | |
|
Temperature: Operating and Storage |
-55°C | +125°C | |
|
Impedence |
50 Ohms |
MATERIALS
Item |
Specification |
|---|---|
|
Body |
Gold Plated Brass |
|
Center Contact |
Gold Plated BeCu Alloy |
| Dielectric |
PTFE & PEI |
| Resistance |
Beryllium Oxide |
*** FOR QUANTITIES GREATER THAN CURRENT STOCK LEVELS CONTACT CUSTOMER SERVICE 1-888-498-3242
- Connector 1 Gender:
- Female
- Connector 1 Series:
- 2.92mm
- Frequency, Max:
- 18 GHz
- Frequency, Min:
- DC
- Power Rating:
- 2 Watts
PRODUCT DETAILS 
HASCO Part Number: HT40F-1
HT18F-2G-1 is a 2.92mm Female RF Load / RF Termination manufactured by HASCO Components. HT18F-2G-1 is rated for operation from DC to 18 GHz and rated for 2 Watt. RF Loads, also known as Terminations are used to prevent signals from flowing back into a transmission line causing unwanted distortion and power loss. Terminations are available for coaxial transmission lines and waveguide. RF load/terminations are indispensable components in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce the signal integrity. By using a termination on an unused port with a matched load (dummy load), the incident energy will be absorbed with minimal reflection. These termination components are commonly used to terminate devices such as couplers, circulators, and switches. They are also widely used in measurement systems to ensure accurate results. HASCO offers a huge selection of RF, microwave and millimeter wave terminations up to 65 GHz with excellent performance over the entire operating range and power handling capabilities up to 800 Watt (CW). HASCO Cage Code: 0T8L4
« Click Here for the HT18F-2G-1 Datasheet
Electrical
Parameter |
Minimum |
Typical |
Maximum |
|
Frequency Range |
DC |
|
18 GHz |
|
VSWR |
DC-6 GHz 1.10:1 |
|
6-18GHz 1.20:1 |
|
Power |
2 Watt | .25 KW | |
|
Temperature: Operating and Storage |
-55°C | +125°C | |
|
Impedence |
50 Ohms |
MATERIALS
Item |
Specification |
|---|---|
|
Body |
Gold Plated Brass |
|
Center Contact |
Gold Plated BeCu Alloy |
| Dielectric |
PTFE & PEI |
| Resistance |
Beryllium Oxide |
WARRANTY INFORMATION
*** FOR QUANTITIES GREATER THAN CURRENT STOCK LEVELS CONTACT CUSTOMER SERVICE 1-888-498-3242
