P/N: HA50A-10

Brand: HASCO Components

HA50A-10 is a 2.4mm Male to Female Attenuator manufactured by HASCO. This type of Attenuator is bidirectional. The operating frequency for this model is DC to 50 GHz and is rated for 0.5 Watts. With an attenuation value of 10 dB. Attenuators like this HA50A-10 are used to reduce or step down the power level of a signal while maintaining the waveforms integrity.

P/N: 1831-00SF

Brand: Southwest Microwave

1831-00SF is a 1.85mm Male to 1.85mm Male in-series adapter manufactured by Southwest Microwave. This in series 1.85mm to 1.85mm coax adapter will operate up to 67 GHz. Adapters that have a male to female or plug to jack configuration are known as "connector savers."

P/N: HLB098-S1-S1-L

Brand: Littlebend by HASCO

The HLB098 Littlebend Ultra Flexible RF Cable is designed for demanding microwave interconnect requirements. They are phase and amplitude stable. This cable is well suited for dense microwave packaging with a 0.20” minimum bend radius in an 0.098” cable with stainless steel braid.

P/N: HWMX15-SFV

Brand: HASCO Components

HWMX15-SFV is a Full V-Band Balanced Mixer. This mixer is designed using the best performance GaAs Schottky beam-lead diodes. These mixers offer excellent low conversion loss and great port to port Isolation. The LO Power required to drive this mixer only needs 13 dBm LO power. The same mixer can be used as an Up-converter or a Down-converter.

P/N: HWLPT19-2-ER

Brand: HASCO Components

HWLPT19-2-ER is a general purpose WR-19 millimeter waveguide termination from HASCO. This waveguide termination will operate from 40 to 60 GHz. A Millimeter Waveguide Termination is a passive RF device specifically designed to prevent RF signals from reflecting back from open-ended or unused waveguide ports. Millimeter Waveguide Terminations dissipate RF energy by producing heat energy.