Questions? Feedback? powered by Olark live chat software

SSMA Torque Wrench - Break Over Type with 1/4 inch Hex Bit - Preset to 5 in-lbs

$182.60
Part #:
HTW-14-05
Brand:
HASCO Components
Weight:
1.50 Ounces
Shipping:
Calculated at checkout
Current Stock:
10

For quantities greater than current stock levels, please contact customer service at 1-888-498-3242

Pricing by Quantity:

QUANTITY

1 to 9

10 or above

PRICE

$182.60

$177.15

ADD TO WISHLIST

Description

Preset Torque Wrench for SSMA or 1/4 HEX connectors preset to 5 in-lbs

Preset torque wrenches are used to properly mate RF Hex Connectors with proper force to ensure a good mate and prevent damage to the center conductors or cause thread stripping. Preset Torque wrenches are available from HASCO Components for various types of coaxial connectors. HASCO offers both the breakover and click type wrenches. Every connector has a different torque setting depending on materials and hex size. Please refer to the table below for additional information.  

Part Number: HTW-14-05 - Preset Torque to: 0.57 ± 0.02 NM [5 ± 0.2 in lbs]

 pdf-icon.png« CAD Drawing   pdf-icon.png« HTW-14-05 Datasheet 

 


Part No.

Description

HTW-516-05


  SMA, 3.5mm, 2.92mm, 2.4mm and 1.85mm (5/16 HEX) - Preset Torque: 5.0 ±0.2 In.lbs (0.56 ±0.02 Nm)

HTW-516-08


  SMA, 3.5mm, 2.92mm, 2.4mm and 1.85mm (5/16 HEX) - Preset Torque: 8.0 ±0.4 In.lbs (0.92 ±0.05 Nm)

HTW-34-08


  Type N (3/4 HEX) - Preset Torque: 8.0 ±0.4 in.lbs (0.92 ±0.05 Nm)

HTW-34-14


  Type N and 7mm (3/4 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm)

HTW-34-23


  Type N and 7mm (3/4 HEX) - Preset Torque: 23.0 ±0.92 in.lbs (2.598 ±0.10 Nm)

HTW-2532-14


  Type N (25/32 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm)

HTW-1316-14


  Type N and SC  (13/16 HEX) -  Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm)

HTW-916-12


  TNC (9/16 HEX) - Preset Torque: 12.0 ±0.6 in.lbs (1.36 ±0.09 Nm)

HTW-58-12


  TNC (5/8 HEX) - Preset Torque: 12.0 ±0.6 in.lbs (1.36 ±0.09 Nm)

HTW-532-02


  SSMC (5/32 HEX) - Preset Torque: 2.0 ±0.1 In.lbs (0.23 ±0.01 Nm)

HTW-14-05


  SSMA (1/4 HEX) Preset Torque: 5.0 ±0.2 In.lbs (0.57 ±0.02 Nm)

HTW-14-08

  
  SSMA (1/4 HEX) Preset Torque: 8.0 ±0.4 In.lbs (0.92 ±0.05 Nm)
  
HTW-1564-04  

    
  1mm (15/64 HEX) - Preset Torque: 4.0 ±0.15 In.lbs (0.45 ±0.02 Nm)

  
  HTW-1.0mm-KIT  
  

   
  1mm (.017 and .200 HEX) - Preset Torque: 8.0 In.lbs ±0.4%

*Disclaimer Notification:
The certificate of calibration comes from a reliable and proprietary source. It is up to the purchaser of this item to determine if they can use this certificate.  Please contact your HASCO Representative with any questions. HASCO does not calibrate this item.

*** FOR QUANTITIES GREATER THAN CURRENT STOCK LEVELS CONTACT CUSTOMER SERVICE 1-888-498-3242
Type:
Torque Wrench
Style:
SMA Torque Wrench
Application:
SSMA
PRODUCT DETAILS

Preset Torque Wrench for SSMA or 1/4 HEX connectors preset to 5 in-lbs

Preset torque wrenches are used to properly mate RF Hex Connectors with proper force to ensure a good mate and prevent damage to the center conductors or cause thread stripping. Preset Torque wrenches are available from HASCO Components for various types of coaxial connectors. HASCO offers both the breakover and click type wrenches. Every connector has a different torque setting depending on materials and hex size. Please refer to the table below for additional information.  

Part Number: HTW-14-05 - Preset Torque to: 0.57 ± 0.02 NM [5 ± 0.2 in lbs]

 pdf-icon.png« CAD Drawing   pdf-icon.png« HTW-14-05 Datasheet 

 


Part No.

Description

HTW-516-05


  SMA, 3.5mm, 2.92mm, 2.4mm and 1.85mm (5/16 HEX) - Preset Torque: 5.0 ±0.2 In.lbs (0.56 ±0.02 Nm)

HTW-516-08


  SMA, 3.5mm, 2.92mm, 2.4mm and 1.85mm (5/16 HEX) - Preset Torque: 8.0 ±0.4 In.lbs (0.92 ±0.05 Nm)

HTW-34-08


  Type N (3/4 HEX) - Preset Torque: 8.0 ±0.4 in.lbs (0.92 ±0.05 Nm)

HTW-34-14


  Type N and 7mm (3/4 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm)

HTW-34-23


  Type N and 7mm (3/4 HEX) - Preset Torque: 23.0 ±0.92 in.lbs (2.598 ±0.10 Nm)

HTW-2532-14


  Type N (25/32 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm)

HTW-1316-14


  Type N and SC  (13/16 HEX) -  Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm)

HTW-916-12


  TNC (9/16 HEX) - Preset Torque: 12.0 ±0.6 in.lbs (1.36 ±0.09 Nm)

HTW-58-12


  TNC (5/8 HEX) - Preset Torque: 12.0 ±0.6 in.lbs (1.36 ±0.09 Nm)

HTW-532-02


  SSMC (5/32 HEX) - Preset Torque: 2.0 ±0.1 In.lbs (0.23 ±0.01 Nm)

HTW-14-05


  SSMA (1/4 HEX) Preset Torque: 5.0 ±0.2 In.lbs (0.57 ±0.02 Nm)

HTW-14-08

  
  SSMA (1/4 HEX) Preset Torque: 8.0 ±0.4 In.lbs (0.92 ±0.05 Nm)
  
HTW-1564-04  

    
  1mm (15/64 HEX) - Preset Torque: 4.0 ±0.15 In.lbs (0.45 ±0.02 Nm)

  
  HTW-1.0mm-KIT  
  

   
  1mm (.017 and .200 HEX) - Preset Torque: 8.0 In.lbs ±0.4%

*Disclaimer Notification:
The certificate of calibration comes from a reliable and proprietary source. It is up to the purchaser of this item to determine if they can use this certificate.  Please contact your HASCO Representative with any questions. HASCO does not calibrate this item.

WARRANTY INFORMATION
*** FOR QUANTITIES GREATER THAN CURRENT STOCK LEVELS CONTACT CUSTOMER SERVICE 1-888-498-3242
Part No: HTW-14-05
SSMA Torque Wrench - Break Over Type with 1/4 inch Hex Bit - Preset to 5 in-lbs

Preset Torque Wrench for SSMA or 1/4 HEX connectors preset to 5 in-lbs

Preset torque wrenches are used to properly mate RF Hex Connectors with proper force to ensure a good mate and prevent damage to the center conductors or cause thread stripping. Preset Torque wrenches are available from HASCO Components for various types of coaxial connectors. HASCO offers both the breakover and click type wrenches. Every connector has a different torque setting depending on materials and hex size. Please refer to the table below for additional information.  

Part Number: HTW-14-05 - Preset Torque to: 0.57 ± 0.02 NM [5 ± 0.2 in lbs]

 pdf-icon.png« CAD Drawing   pdf-icon.png« HTW-14-05 Datasheet 

 


Part No.

Description

HTW-516-05


  SMA, 3.5mm, 2.92mm, 2.4mm and 1.85mm (5/16 HEX) - Preset Torque: 5.0 ±0.2 In.lbs (0.56 ±0.02 Nm)

HTW-516-08


  SMA, 3.5mm, 2.92mm, 2.4mm and 1.85mm (5/16 HEX) - Preset Torque: 8.0 ±0.4 In.lbs (0.92 ±0.05 Nm)

HTW-34-08


  Type N (3/4 HEX) - Preset Torque: 8.0 ±0.4 in.lbs (0.92 ±0.05 Nm)

HTW-34-14


  Type N and 7mm (3/4 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm)

HTW-34-23


  Type N and 7mm (3/4 HEX) - Preset Torque: 23.0 ±0.92 in.lbs (2.598 ±0.10 Nm)

HTW-2532-14


  Type N (25/32 HEX) - Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm)

HTW-1316-14


  Type N and SC  (13/16 HEX) -  Preset Torque: 14.0 ±0.8 in.lbs (1.60 ±0.09 Nm)

HTW-916-12


  TNC (9/16 HEX) - Preset Torque: 12.0 ±0.6 in.lbs (1.36 ±0.09 Nm)

HTW-58-12


  TNC (5/8 HEX) - Preset Torque: 12.0 ±0.6 in.lbs (1.36 ±0.09 Nm)

HTW-532-02


  SSMC (5/32 HEX) - Preset Torque: 2.0 ±0.1 In.lbs (0.23 ±0.01 Nm)

HTW-14-05


  SSMA (1/4 HEX) Preset Torque: 5.0 ±0.2 In.lbs (0.57 ±0.02 Nm)

HTW-14-08

  
  SSMA (1/4 HEX) Preset Torque: 8.0 ±0.4 In.lbs (0.92 ±0.05 Nm)
  
HTW-1564-04  

    
  1mm (15/64 HEX) - Preset Torque: 4.0 ±0.15 In.lbs (0.45 ±0.02 Nm)

  
  HTW-1.0mm-KIT  
  

   
  1mm (.017 and .200 HEX) - Preset Torque: 8.0 In.lbs ±0.4%

*Disclaimer Notification:
The certificate of calibration comes from a reliable and proprietary source. It is up to the purchaser of this item to determine if they can use this certificate.  Please contact your HASCO Representative with any questions. HASCO does not calibrate this item.

Part No: HTW-14-05
LTR
DESCRIPTION
DATE
APPR
THIS DRAWING IS A CONTROLLED DOCUMENT
DRAWN BY:
CHECKED BY:
APPROVED BY:
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF HASCO COMPONENTS AND SHALL NOT BE REPRODUCED, COPIED NOR USED - IN WHOLE OR IN PART - AS THE BASIS FOR THE MANUFACTURE OR SALE OF OTHER ITEMS WITHOUT THE EXPRESS, RITTEN PERMISSION OF HASCO COMPONENTS.

MATERIALS:

SEE DATA SHEET

CAGE CODE:

HTW-14-05

MATERIALS:

SEE DATA SHEET

SCALE:

NS

SIZE:

REV: